[ale] What to do about non-cooperative SMARTD drive?
Jim Kinney
jim.kinney at gmail.com
Sun Nov 16 21:56:58 EST 2014
That is rather concerning. Can the drive be readily replaced? Have you run
a smartd test? Not all drives with the capability are actually configured
to measure and record smartd data.
On Nov 16, 2014 9:05 PM, "Neal Rhodes" <neal at mnopltd.com> wrote:
> So, a Dell Optiplex 740 has a Samsung Spinpoint F3 disk (HD754JJ) which
> has been working ok for several years.
>
> Over the last year, it has griped on startup about the SMARTD status, and
> she has to poke F1 to boot.
>
> OK, this past week it gave us a scare, and so I leaped into action. (ok,
> I strolled into action...)
>
> Trying to look at it with smartctl gives one pause... It just doesn't
> want to support much of the SMARTD protocol beyond name, rank and serial
> number. This is a fairly modern drive. I've used smartctl on much
> older drives and had it cooperate. Been able to do short and long self
> tests. I'm getting no cooperation from this drive at all.
>
> I'm wondering if I should replace this while it's still running. It's
> running, and I must admit I didn't do the smartd checking when my wife
> bought this a couple years ago.
>
>
> Neal Rhodes
> MNOP Ltd
>
>
> smartctl 6.3 2014-07-26 r3976 [x86_64-w64-mingw32-win7-sp1] (sf-6.3-1)
> Copyright (C) 2002-14, Bruce Allen, Christian Franke,
> www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: SAMSUNG SpinPoint F3
> Device Model: SAMSUNG HD754JJ
> Serial Number: [No Information Found]
> Firmware Version: 1AJ1
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: [No Information Found]
> Local Time is: Sun Nov 16 20:52:11 2014 EST
> SMART support is: Available - device has SMART capability.
> Enabled status cached by OS, trying SMART RETURN STATUS
> cmd.
> SMART support is: Enabled
> AAM feature is: Unavailable
> APM feature is: Unavailable
> Rd look-ahead is: Unavailable
> Write cache is: Unavailable
> ATA Security is: Unavailable
> Wt Cache Reorder: Unavailable
>
> Read SMART Thresholds failed: Function not implemented
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: ( 6840) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging support.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 114) minutes.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
> 1 Raw_Read_Error_Rate POSR-K 001 001 --- - 199753
> 2 Throughput_Performance -OS--K 252 252 --- - 0
> 3 Spin_Up_Time PO---K 074 070 --- - 8162
> 4 Start_Stop_Count -O--CK 100 100 --- - 354
> 5 Reallocated_Sector_Ct PO--CK 252 252 --- - 0
> 7 Seek_Error_Rate -OSR-K 252 252 --- - 0
> 8 Seek_Time_Performance --S--K 252 252 --- - 0
> 9 Power_On_Hours -O--CK 100 100 --- - 11987
> 10 Spin_Retry_Count -O--CK 252 252 --- - 0
> 11 Calibration_Retry_Count -O--CK 252 252 --- - 0
> 12 Power_Cycle_Count -O--CK 100 100 --- - 357
> 191 G-Sense_Error_Rate -O---K 252 252 --- - 0
> 192 Power-Off_Retract_Count -O---K 252 252 --- - 0
> 194 Temperature_Celsius -O---- 064 061 --- - 35 (Min/Max
> 14/39)
> 195 Hardware_ECC_Recovered -O-RCK 100 100 --- - 0
> 196 Reallocated_Event_Count -O--CK 252 252 --- - 0
> 197 Current_Pending_Sector -O--CK 100 099 --- - 60
> 198 Offline_Uncorrectable ----CK 252 252 --- - 0
> 199 UDMA_CRC_Error_Count -OS-CK 100 100 --- - 49
> 200 Multi_Zone_Error_Rate -O-R-K 100 100 --- - 0
> 223 Load_Retry_Count -O--CK 252 252 --- - 0
> 225 Load_Cycle_Count -O--CK 100 100 --- - 357
> ||||||_ K auto-keep
> |||||__ C event count
> ||||___ R error rate
> |||____ S speed/performance
> ||_____ O updated online
> |______ P prefailure warning
>
> Read SMART Log Directory failed: Function not implemented
>
> ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not
> implemented
> Read GP Log Directory failed
>
> SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
>
> Read SMART Error Log failed: Function not implemented
>
> SMART Extended Self-test Log (GP Log 0x07) not supported
>
> Read SMART Self-test Log failed: Function not implemented
>
> Read SMART Selective Self-test Log failed: Function not implemented
>
> SCT Commands not supported
>
> Device Statistics (GP Log 0x04) not supported
>
> SATA Phy Event Counters (GP Log 0x11) not supported
>
>
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.ale.org/pipermail/ale/attachments/20141116/b9faf8e2/attachment.html>
More information about the Ale
mailing list