[ale] USB Cam (LONG)

Dow Hurst dhurst at kennesaw.edu
Fri Dec 27 09:53:34 EST 2002


Seems to me a card reader would solve this problem.  I've had no 
experience with digital camera's to speak of.  Just borrowed one once 
and used the Win based software on someone else's system to get the 
pictures out.  Sound's like you need a card reader.
Dow


Jeff Hubbs wrote:

>Hello, all, and Merry Christmas!
>
>A few days ago I got a Vivitar 3555T USB digital still camera as a
>gift.  For jollies, when I got it home, I hooked it up to my Mandrake
>9,0 box to see what it would do.
>
>Here's dmesg from the encounter, during which I tried to mount the
>device using several -t options:
>
>hub.c: USB new device connect on bus2/1, assigned device number 2
>usb.c: USB device 2 (vend/prod 0x461/0x822) is not claimed by any active
>driver.
>Initializing USB Mass Storage driver...
>usb.c: registered new driver usb-storage
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: Digital   Model: Image Device      Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>WARNING: USB Mass Storage data integrity not assured
>USB Mass Storage device found at 2
>USB Mass Storage support registered.
><scissors of brevity>
>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>usb-uhci.c: interrupt, status 2, frame# 1460
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: p1
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>VFS: Disk change detected on device 08:00
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>VFS: Disk change detected on device 08:00
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
><******this repeats several times, notes the scissors of brevity******>
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
> I/O error: dev 08:00, sector 0
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>Device busy for revalidation (usage=1)
> I/O error: dev 08:00, sector 0
>FAT: unable to read boot sector
>usb-uhci.c: interrupt, status 3, frame# 1684
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>Device busy for revalidation (usage=1)
> I/O error: dev 08:00, sector 0
>FAT: unable to read boot sector
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>usb-uhci.c: interrupt, status 3, frame# 130
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>Device busy for revalidation (usage=1)
> I/O error: dev 08:00, sector 0
>FAT: unable to read boot sector
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>usb-uhci.c: interrupt, status 3, frame# 461
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>Device busy for revalidation (usage=1)
> I/O error: dev 08:00, sector 0
>FAT: unable to read boot sector
>SCSI device (ioctl) reports ILLEGAL REQUEST.
>SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
>sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>usb.c: USB disconnect on device 2
>Device not ready.  Make sure there is a disc in the drive.
>VFS: Disk change detected on device 08:00
>sda : READ CAPACITY failed.
>sda : status = 1, message = 00, host = 0, driver = 08
>Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
>sda : block size assumed to be 512 bytes, disk size 1GB.
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
>Device not ready.  Make sure there is a disc in the drive.
>VFS: Disk change detected on device 08:00
>sda : READ CAPACITY failed.
>sda : status = 1, message = 00, host = 0, driver = 08
>Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
>sda : block size assumed to be 512 bytes, disk size 1GB.
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
>
>Here is the output of cat /proc/filesystems:
>
>nodev   rootfs
>nodev   bdev
>nodev   proc
>nodev   sockfs
>nodev   tmpfs
>nodev   shm
>nodev   pipefs
>        ext2
>nodev   ramfs
>nodev   devfs
>nodev   devpts
>        ext3
>nodev   usbdevfs
>nodev   usbfs
>nodev   supermount
>        udf
>        iso9660
>nodev   smbfs
>        vfat
>        msdos
>
>The cam can be "browsed" from WinME once the accompanying CD's drivers
>and software are installed.
>
>Is this failing because it's got some weird filesystem inside it?  Would
>using a SmartCard reader get me around this problem or is this pretty
>much a "Wincamera?"  Google helped me not.  
>
>- Jeff
>
>_______________________________________________
>Ale mailing list
>Ale at ale.org
>http://www.ale.org/mailman/listinfo/ale
>
>  
>

-- 
__________________________________________________________
Dow Hurst                  Office: 770-499-3428
Systems Support Specialist    Fax: 770-423-6744
1000 Chastain Rd., Bldg. 12
Chemistry Department SC428  Email:dhurst at kennesaw.edu
Kennesaw State University         Dow.Hurst at mindspring.com
Kennesaw, GA 30144
*********************************
*Computational Chemistry is fun!*
*********************************


_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale






More information about the Ale mailing list