[ale] Thanks to all! Ultra66 card and 18gig is working.

Sun Nov 14 15:04:33 EST 1999

--------------4E5FE51969D85B8E24A0906E
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Chris, Steven and all the others,

    I would like to take this time to thank all who sent words of
wisdom. As you can see below it's seen by linux and is working just
fine. My next  step will be to find the way to get linux to boot up on
the 18gig. This as I understand it, will take some kind of boot disk
that has the driver for the ultra66 card or a way to get the driver on
too the master boot recoard so at boot up it knows what to do.  There is
one thing I see at boot up that I don't undersatnd. When I built the
kernel, I said "yes" to the DMA stuff, but it looks like the systyem is
disabling it. For this and many other newbie question, please stand-by,
I type slow.

Uniform Multi-Platform E-IDE driver Revision: 6.20
PDC20262: IDE controller on PCI bus 00 dev 58
PDC20262: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: simplex device:  DMA disabled   <<<<<<<<<<< Does anyone know
why this is happening?
ide0: ALI15X3 Bus-Master DMA disabled (BIOS) <<<<< Does anyone know why
this is happening?
ALI15X3: simplex device:  DMA disabled   <<<<<<<<<<< Does anyone know
why this is happening?
ide1: ALI15X3 Bus-Master DMA disabled (BIOS) <<<<< Does anyone know why
this is happening?
hda: WDC AC26400B, ATA DISK drive
hdb: WDC AC36400L, ATA DISK drive
hdc: RICOH CD-R/RW MP7040A, ATAPI CDROM drive
hdd: ASUS CD-S400, ATAPI CDROM drive
hde: WDC AC418000D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xb400-0xb407,0xb002 on irq 10
hda: WDC AC26400B, 6149MB w/512kB Cache, CHS=784/255/63
hdb: WDC AC36400L, 6149MB w/256kB Cache, CHS=784/255/63
hde: WDC AC418000D, 17206MB w/1966kB Cache, CHS=34960/16/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
  Vendor: RICOH     Model: CD-R/RW MP7040A   Rev: 1.40
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
  Vendor: ASUS      Model: CD-S400           Rev: 2.30
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI cdroms total.
sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray

There is more but it does not make for good reading.

Again thanks goes out to all who helped me get this far.

Lee Roy

--------------4E5FE51969D85B8E24A0906E
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
</pre>
<html>
Chris, Steven and all the others,
 
 I would like to take this time to thank all who
sent words of wisdom. As you can see below it's seen by linux and is working
just fine. My next step will be to find the way to get linux to boot
up on the 18gig. This as I understand it, will take some kind of boot disk
that has the driver for the ultra66 card or a way to get the driver on
too the master boot recoard so at boot up it knows what to do. There
is one thing I see at boot up that I don't undersatnd. When I built the
kernel, I said "yes" to the DMA stuff, but it looks like the systyem is
disabling it. For this and many other newbie question, please stand-by,
I type slow.
Uniform Multi-Platform E-IDE driver Revision: 6.20
 PDC20262: IDE controller on PCI bus 00 dev 58
 PDC20262: not 100% native mode: will probe irqs later
 ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio,
hdf:pio
 ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio,
hdh:pio
 ALI15X3: IDE controller on PCI bus 00 dev 78
 ALI15X3: not 100% native mode: will probe irqs later
 ALI15X3: simplex device: DMA disabled <<<<<<<<<<<
Does anyone know why this is happening?
 ide0: ALI15X3 Bus-Master DMA disabled (BIOS) <<<<<
Does anyone know why this is happening?
 ALI15X3: simplex device: DMA disabled <<<<<<<<<<<
Does anyone know why this is happening?
 ide1: ALI15X3 Bus-Master DMA disabled (BIOS) <<<<<
Does anyone know why this is happening?
 hda: WDC AC26400B, ATA DISK drive
 hdb: WDC AC36400L, ATA DISK drive
 hdc: RICOH CD-R/RW MP7040A, ATAPI CDROM drive
 hdd: ASUS CD-S400, ATAPI CDROM drive
 hde: WDC AC418000D, ATA DISK drive
 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 ide1 at 0x170-0x177,0x376 on irq 15
 ide2 at 0xb400-0xb407,0xb002 on irq 10
 hda: WDC AC26400B, 6149MB w/512kB Cache, CHS=784/255/63
 hdb: WDC AC36400L, 6149MB w/256kB Cache, CHS=784/255/63
 hde: WDC AC418000D, 17206MB w/1966kB Cache, CHS=34960/16/63
 Floppy drive(s): fd0 is 1.44M
 FDC 0 is a post-1991 82077
 scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 scsi : 1 host.
 Vendor: RICOH Model: CD-R/RW MP7040A 
Rev: 1.40
 Type: CD-ROM 
ANSI SCSI revision: 02
 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
 Vendor: ASUS Model: CD-S400 
Rev: 2.30
 Type: CD-ROM 
ANSI SCSI revision: 02
 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
 scsi : detected 2 SCSI cdroms total.
 sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
There is more but it does not make for good reading.
Again thanks goes out to all who helped me get this far.
Lee Roy</html>

--------------4E5FE51969D85B8E24A0906E--