[ale] upgrading desktop
Bob
bobabc at bellsouth.net
Tue Jul 28 19:06:08 EDT 2020
Hi J.D.,
On 2020-07-28 4:06 p.m., DJ-Pfulio via Ale wrote:
> What's your budget??? What's the goal?
My desktop seems to be mostly fine. Sometimes, things get slow when
memory runs low---usually, too many tabs open on firefox. I was
thinking of some modest upgrades, e.g., memory and ssd.
If I were to spend more, I might be more interested in something small
and fanless.
>
> Is the Lenovo using standard PSU and case?
The dimensions are 6.89" W X 16.10" D X 14.17" H; 175mm W X 409mm D X
360mm H. A standard ATX psu is supposed to fit in the chassis. Here's
a picture that someone else posted of the same machine:
https://i.imgur.com/lF6S4Jm.jpg
Here's that same machine after they made a few changes:
https://i.imgur.com/6rWnuaR.jpg
If it doesn't have a standard
> case, most major "upgrades" are risky. Need all the screws and
> clearances to be right.?? OTOH, a $30 case for someone who doesn't open
> it more than once a year to clean out the dust is just fine.
>
> The easy way to provide info about your current box, is to run:?? inxi
> -Fz and post that.
System:
Host: bob-IdeaCentre-K410 Kernel: 4.15.0-112-generic x86_64 bits: 64
Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa
Machine:
Type: Desktop System: LENOVO product: 10089 v: IdeaCentre K410
serial: <filter>
Mobo: LENOVO model: MAHOBAY v: Win8 STD MM DPK IPG serial: <filter>
UEFI: LENOVO v: ESKT20A date: 10/22/2012
CPU:
Topology: Quad Core model: Intel Core i5-3330 bits: 64 type: MCP
L2 cache: 6144 KiB
Speed: 1717 MHz min/max: 1600/3200 MHz Core speeds (MHz): 1: 1657 2: 1806
3: 1990 4: 2245
Graphics:
Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics
driver: i915 v: kernel
Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded:
fbdev,vesa
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 2500 (IVB GT1)
v: 4.2 Mesa 20.0.8
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
driver: snd_hda_intel
Sound Server: ALSA v: k4.15.0-112-generic
Network:
Device-1: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce
IF: wlp3s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 2.73 TiB used: 86.87 GiB (3.1%)
ID-1: /dev/sda vendor: Seagate model: ST1000DM003-9YN162 size: 931.51 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD1003FZEX-00MK2A0
size: 931.51 GiB
ID-3: /dev/sde type: USB vendor: Western Digital model: WD Elements 10B8
size: 931.48 GiB
Partition:
ID-1: / size: 908.38 GiB used: 86.81 GiB (9.6%) fs: ext4 dev: /dev/sdb2
ID-2: swap-1 size: 8.31 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda9
ID-3: swap-2 size: 7.63 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb1
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 234 Uptime: 11h 19m Memory: 7.68 GiB used: 3.67 GiB (47.7%)
Shell: bash inxi: 3.0.27
>
> $214 for MB+CPU combo:
> https://www.microcenter.com/product/5003878/-amd-ryzen-5-3600-with-wraith-stealth-cooler,-asus-b450m-a-csm-prime,-cpu---motherboard-bundle
> The only negative I see with this is a crappy Realtek NIC, so I'd need
> to spend $25 on a quality NIC.?? The forums are full of people with
> Realtek NIC issues. I have a G3258 with a flakey Realtek NIC. Ended up
> disabling it and throwing in an old cheap Marvell.
I've heard realtek nic's are lousy. So far, the realtek nic in my
desktop has been fine.
>
> I need to check a few other MB+CPU combos to see what's available.
> Microcenter almost always has some
>
> With a standard case, that MB+CPU combo just needs some DDR4 RAM and a
> GPU.?? That's almost 18K passmarks in 65W.?? 5 yrs ago, that was Xeon
> server performance.?? My Ryzen 2600 is just 13K passmarks.?? Reuse
> everything else you already have.
>
> There's little purpose in doing a little upgrade to an 8 yr old CPU
> unless it is only a CPU swap and the newer one is 2x faster - minimal.
Wouldn't going from 8GB to 16GB of ram be a worthwhile improvement?
> However, an SSD would make a difference for pretty much any system.?? I'm
> a fan of the Samsung 8xx and 9xx lines. Just be sure to check the
> warranty TBW numbers so you know what you are getting. I have a
> model: Samsung_SSD_860 size: 500.1GB in a laptop. It is a SATA interface
> with a 2.5inch form factor standard for laptops.?? I've never seen a
> 3.5inch form in any SATA.?? I have seen m.2 for both SATA and NVMe, but
> you don't have any m.2 slots, so that won't work.?? My rule for SSDs is
> pretty simple.?? If they don't have a warranty based on TBW (endurance)
> or they refuse to publish that data, then I won't buy.?? Their are a
> number of SSD "brands" which do that.?? I've had a few SSDs fail over the
> years. They were much cheaper than the Samsung.
> I also have a model: Micron_1100_MTFD size: 512.1GB.?? Micron is who I
> think WD and Crucial buy their SSDs from.?? I would have preferred to get
> a Samsung, but needed the storage for a build and was already over the
> budget. The Samsung was $30 more at the time.
>
> When I was researching SSD lifespans and linux information, so things
> jumped out.?? I'm a simple person and only recall when I make a decision
> to avoid certain types, not the details. Those decisions are based on my
> needs which probably don't meet anyone else's needs.?? Do your own
> research.?? Plus, it has been 18+ months since my last SSD purchase. The
> SSD world could have changed in that time.
>
> How big should an SSD be??? How can we say? For some systems, 16G is too
> much. For others 2TB isn't enough.
>
> Because you didn't say what CPU is currently used, we can't tell whether
> any upgrade is worth it.
Quad Core model: Intel Core i5-3330
>
> 280W is probably fine for anyone not dropping in a $130 GPU that needs
> extra power, but it completely depends on the current CPU draw and how
> much storage there is.
>
--Bob
More information about the Ale
mailing list