[ale] [OT] router question

[JD]

Perhaps the MAC for the router is registered with Comcast?

Spoof the MAC for the WAN port on the router and see if you get the double-NAT
you seem to want.  I wouldn't want that myself, but to each their own.

When you are done, change the MAC back.

You'll probably need to reboot the modem and the router in the prescribed
Comcast order for changes to be seen.  I thnk that is power everything off -
modem, wait, wait, router, wait, wait ... internal network stuff. I wouldn't
worry about the internal network stuff, unless that LAN conflicts with the modem.

OTOH, I'm clueless. ;)

On 08/25/2013 08:26 AM, John Pilman wrote:
> I need a reality check on what I am seeing at home.  I have a Motorola Surfboard
> Modem that says it is setup to provide DHCP addressing in the range
> 192.168.100.11 - 192.168.10.42.
> Downstream I have a Dlink wireless router that says its connection type is DHCP
> and its WAN address is 24.99.228.229.
> 
> I expected the Dlink router to have a WAN address in the above range. I tried a
> few things, like releasing and renewing the connection on the router using the
> HTML menus, but I came back to the same thing.  The Surfboard does not look like
> it provides anything for me to configure. I can only get status information for it.
>