[ale] wireless card

[Brian Pitts]

James Sumners wrote:
> After my last move, I ordered a Linksys WRT54G-L router to replace a
> Netgear routher. I loaded the Tomato firmware
> (http://www.polarcloud.com/tomato) on it. Before I made the switch, I
> used the new router as a wireless bridge for a while. It worked quite
> well.
> 
> In other words, the Tomato firmware will do the same thing. I mention
> it because I like the Tomato firmware. It's easy to use. Setting up my
> bandwidth restrictions was very simple. Which was my original reason
> for choosing Tomato over OpenWRT; I didn't see any QoS support in
> OpenWRT.
> 

FWIW, The X-Wrt Web Interface for OpenWRT at http://x-wrt.org/ supports 
a QoS package and is easy to use. Just install X-Wrt, then navigate to 
the QoS page in the X-Wrt web interface.

Screenshot:
http://www.bitsum.com/xwrt/full/network_qos.png

-Brian