[ale] WD 120 GB USB drive

[mike barnes]

does not look like either. Below is the output:

=================
usb 5-4.2: USB disconnect, address 4
usb 5-4.2: new full speed USB device using ehci_hcd and address 7
usb 5-4.2: new device found, idVendor=05e3, idProduct=0604
usb 5-4.2: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-4.2: Product: USB Hub
usb 5-4.2: configuration #1 chosen from 1 choice
hub 5-4.2:1.0: USB hub found
hub 5-4.2:1.0: 4 ports detected
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100
DST=224.0.0.251LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP
SPT=5353 DPT=5353 LEN=44
=============================

On 10/7/07, Brian Pitts <brian at polibyte.com> wrote:
>
> mike barnes wrote:
> > Yes, am sure that it is not being mounted. I did not format the drive
> > since it contains my wife's pictures and I would be killed if she lost
> > these pictures.
> >
> > What is interesting is that a USB flash drive works perfectly fine while
> > this USB hard drive appears to not event be recognized.
> >
> > Mike
> >
>
> These may be things you've already checked, but...
>
> Immediately after connecting and powering on in the drive, can you run
> 'dmesg | tail' and see if a new scsi device was detected.
>
> Does the drive have a fat or ntfs filesystem?
>
> -Brian
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>
-------------- next part --------------
An HTML attachment was scrubbed...