[ale] ata_piix compiled in kernel 2.6.20

[Christopher Fowler]

Problem Solved

Had to compile SCSI_SD, SCSI_SG in the kernel as well.

On Fri, 2007-03-23 at 12:38 -0400, Christopher Fowler wrote:
> Is there a reason pn 2.6.20 that if I compile my ata_piix driver in
> kernel that my drives are not recognized?  The kernel output is
> different and the result is that my md0 and md1 raids are not detected.
> I'm trying to compile all hardware that I have in kernel and all
> optional stuff as modules.
> 
> 
> Compiled:
> 
> ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
> ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 19
> ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 19
> scsi0 : ata_piix
> ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/133
> scsi1 : ata_piix
> ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
> ata2.00: ata2: dev 0 multi count 16
> ata2.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0
> ANSI: 5
> scsi 1:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0
> ANSI: 5
> 
> Module:
> ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 17
> ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 17
> scsi0 : ata_piix
> ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/133
> scsi1 : ata_piix
> ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
> ata2.00: ata2: dev 0 multi count 16
> ata2.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0
> ANSI: 5
> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> sda: Write Protect is off
> SCSI device sda: write cache: enabled, read cache: enabled, doesn't
> support DPO 
> or FUA
> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> sda: Write Protect is off
> SCSI device sda: write cache: enabled, read cache: enabled, doesn't
> support DPO 
> or FUA
>  sda: sda1 sda2
> sd 0:0:0:0: Attached scsi disk sda
> scsi 1:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0
> ANSI: 5
> SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
> sdb: Write Protect is off
> SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
> support DPO 
> or FUA
> SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
> sdb: Write Protect is off
> SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
> support DPO 
> or FUA
>  sdb: sdb1 sdb2
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale