[ale] swap for tech support

[Jeffrey B. Layton]

Are you trying to configure RAID-1 on the whole OS
using the 60GB and the 6GB drives?

> I need some help.
>
> Trying to get RAID-1 array set up so I can install distro of choice
> (and try several out before making final decision) on rebuilt box.
>
> After banging my head against a brick wall for two nights I have
> given up.  It is obvious that I do not think along the same pathways
> as the person who devised the Red Hat RAID install software and I
> can not decipher the proper _order_ for the steps in the process -- and
> Red Hat's own instructions don't help.
>
>
> To swap for assistance:
>
> one ASUS A&N266-VM/AA mobo w/AMD cpu and fan; 512 mgb memory,
> onboard Nvidia graphics, extra ethernet card; two ATA hard drives:
> one 60 GB and one 6 GB??  Probably do just fine as a file server.
>
> *** NO CASE ***  (The new mobo is in it!)
>
> Board has three PCI slots, one AGP slot, but only two memory slots
> and can not handle the newer SATA drive cables.
>
> Sean
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale