[ale] Cat-5 question

[Christopher Fowler]

On Sun, 2006-04-09 at 15:09 -0400, David Corbin wrote:
> 
> What I remember doing, is tyring to get all the wires in the right
> order, and 
> flat, and the just training them by rubbing thumb and forefinger, and
> pulling 
> over it several times.  Once they lay flat, but not fanned a little
> bit, it's 
> not too hard to get them int the connector.  They also need to all be
> the 
> exact same length.  I think I tend to clip them once they're
> flattened.

1.  Remove the outer jacket of the CAT-5 by about .5" or more
2.  Untwist all wires
3.  straighten them and align them.
    1. Orange/White
    2. Orange
    3. Green/White
    4. Blue
    5. Blue/White
    6. Green
    7. Brown/White
    8. Brown
4.  Dry fit in connector
5.  Trim to fit
6.  Crimp
7.  Use