[ale] Slow connection on Cisco Switch

James P. Kinney III jkinney at localnetsolutions.com
Fri Oct 14 12:12:29 EDT 2005


Hey Chris. I was out for a while. Looks like you found the magic trick.

Is there a reason that hd should ever be used (assuming all devices are
fd capable)? It seems to me that other than a few, really old modem
protocols and perhaps frame-relay, hd should go the way of the dodo.
Certainly for ethernet traffic.

On Fri, 2005-10-14 at 10:15 -0400, Christopher Fowler wrote:
> This problem fixed.
> 
> Apparently there was a problem in negotiating duplex.  The RH box was
> running at full and the switch at half.   I forced the port on the
> switch to be full and a 10m file transfer went from 4m to 1s.
> 
> On Fri, 2005-10-14 at 10:03, Christopher Fowler wrote:
> > Okay.
> > 
> > I'm connected to the switch.
> > 
> > 6w2d: %LINK-4-ERROR: FastEthernet0/8 is experiencing errors
> > Switch#show interface FastEthernet0/8
> > FastEthernet0/8 is up, line protocol is up 
> >   Hardware is Fast Ethernet, address is 0006.531f.8908 (bia
> > 0006.531f.8908)
> >   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, 
> >      reliability 253/255, txload 1/255, rxload 1/255
> >   Encapsulation ARPA, loopback not set
> >   Keepalive not set
> >   Auto-duplex (Half), Auto Speed (100), 100BaseTX/FX
> >   ARP type: ARPA, ARP Timeout 04:00:00
> >   Last input never, output 00:00:00, output hang never
> >   Last clearing of "show interface" counters never
> >   Queueing strategy: fifo
> >   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> >   5 minute input rate 5000 bits/sec, 6 packets/sec
> >   5 minute output rate 0 bits/sec, 0 packets/sec
> >      3793529 packets input, 3007993828 bytes
> >      Received 24356 broadcasts, 0 runts, 0 giants, 0 throttles
> >      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
> >      0 watchdog, 0 multicast
> >      0 input packets with dribble condition detected
> >      4792645 packets output, 649608952 bytes, 0 underruns
> >      11682 output errors, 84298 collisions, 1 interface resets
> >      0 babbles, 11694 late collision, 19773 deferred
> >      0 lost carrier, 0 no carrier
> >      0 output buffer failures, 0 output buffers swapped out
> > 
> > It looks like the port is set for half.  I've changed ports and I've
> > changed cables.  Is there a way to set the port to FD and see if that
> > helps?  Maybe the RH box is running at FD?
> > 
> > 
> > 
> > On Fri, 2005-10-14 at 09:36, Christopher Fowler wrote:
> > > Its a 2900 XL.  I've not even attempted to configure it.  I purchased
> > > off eBay.  
> > > 
> > > All other computers work well and this thing is fast.  I assuming it is
> > > a problem where the switch wants to do FD but the adapter on the RH 7.2
> > > box is failing at that.  I had this problem in the past and we had to
> > > tell the Cisco to force HD on that port.  I don't know how to do that on
> > > a Cisco.  I don't even have the password to the switch.  I'm hoping that
> > > the password is not set.  I'm building a console cable now to connect to
> > > the console of the Cisco.
> > > 
> > > 
> > > On Fri, 2005-10-14 at 09:31, James P. Kinney III wrote:
> > > > On Fri, 2005-10-14 at 09:14 -0400, Christopher Fowler wrote:
> > > > > I have a RH box attached to a Cisco Switch.  The connection seems to
> > > > > work okay when using ssh and protocols that do not send a lot of data. 
> > > > > The LED is green indicating 100m connection.  The problem is when I
> > > > > scp.  When I scp it takes almost 3 minutes to transfer 10m. The LED on
> > > > > the switch is blinking orange and green when this happens.  Can anyone
> > > > > tell me what is going on?
> > > > 
> > > > Collisions? Does the switch support full duplex or only half? I ran into
> > > > a switch that was collision city until I turned full-duplex to
> > > > half-duplex. Then it sped up quite nicely.
> > > > 
> > > > > 
> > > > > Thanks,
> > > > > Chris
> > > > >  
> > > > > 
> > > > > _______________________________________________
> > > > > Ale mailing list
> > > > > Ale at ale.org
> > > > > http://www.ale.org/mailman/listinfo/ale
> > > 
> > > _______________________________________________
> > > Ale mailing list
> > > Ale at ale.org
> > > http://www.ale.org/mailman/listinfo/ale
> > 
> > _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
-- 
James P. Kinney III          \Changing the mobile computing world/
CEO & Director of Engineering \          one Linux user         /
Local Net Solutions,LLC        \           at a time.          /
770-493-8244                    \.___________________________./
http://www.localnetsolutions.com

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics)
<jkinney at localnetsolutions.com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part




More information about the Ale mailing list