[ale] Serial ATA install

[Jonathan Glass]

Quoting Christopher Fowler <cfowler at outpostsentinel.com>:

> I'm setting up a SATA install with FC2.  I have 2 disks that are setup
> in the SATA bios as RAID1.  In FC2 I see a /dev/hde and a /dev/hdg.  It
> appears that those are the two disks.  Should I ignore /dev/hdg?  
> 
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 


This happens when using FC2 and Promise cards.  I just use the first disk, and
ignore the second.  All changes happen at the hardware controller level, so if
one drive dies, I just reverse the cables and reboot.

Jonathan Glass-- 
Jonathan Glass, RHCE, MCP, Security+, Linux+, Network+, A+
System Support Specialist II
Institute for Bioengineering and Bioscience
315 Ferst Drive NW
Atlanta, Georgia 30332-0363
Office: 404-385-0127
Cell: 404-444-4086

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/