[ale] modeline for Dell 2001FP

[Stephan Uphoff]

> "1600x1200" 162.00 1600 1624 1976 2000 1200 1201 1204 1256 +HSync +VSync

What is the error message ?

Are you sure you need a modeline ?

My Monitor section for a simular monitor is:

Section "Monitor"
        #DisplaySize      410   310     # mm
        Identifier   "Monitor0"
        VendorName   "AMT"
        ModelName    "PL201M"
        Option      "DPMS"
EndSection

If you absolutely need a modeline try
 "1600x1200" 162.00 1600 1624 1976 2160 1200 1201 1204 1250 +HSync +VSync

This should be 75KHz/60Hz.


Good luck
	Stephan

> Fro 
> I've been trying to figure the correct modeline and XF86Config settings to 
> drive a Dell flatpanel at what it should be able to do.
> 
> I want 1600x1200 at 60Hz vertical and 75kHz horizontal refresh rates and a dot 
> clock of 162MHz.
> 
> The current modeline is being rejected by the Xserver since it says the 
> horizontal sync is out of range.  Here is the current line:
> 
> "1600x1200" 162.00 1600 1624 1976 2000 1200 1201 1204 1256 +HSync +VSync
> 
> The video card is Nvidia Quadro FX1000 w/128Mb
> 
> I am just not sure how to manipulate the horizontal specs.  Dell docs specify 
> that the monitor is capable of 1600x1200 only at 60Hz.  The pixel clock is 
> 162MHz for the monitor from the docs too.  I'm sure the card ought to do that. 
>   I just have the horizontal sync set wrong.  Dell didn't have a Linux 
> modeline preset under RedHat Ent. 3.0 so when I switched to SuSE 9.1 I wasn't 
> concerned.  Now that I can't seem to get it set, I've gone back to the 
> modeline docs and am frustrated with trying to figure it out manually.  Any 
> advice?  Thanks,
> Dow
>