[ale] HELP ! FAX receiving troubles

[Mazukna, Tomas]

Getting closer.....
Added those to mgetty.config

Here is the config for modem...

port ttyS0
#  speed 38400
#  switchbd 0
  switchbd 19200
  fax-only y
  modem-type c2.0
  init-chat "" \dATQ0V1H0 OK ATS0=0Q0&D3&C1 OK AT#CID=1 OK
  answer-chat "" ATA CONNECT \c \r


Looks like it is not setting speed correctly ....

01/08 13:54:22 yS0    select returned 1
01/08 13:54:22 yS0   checking lockfiles, locking the line
01/08 13:54:22 yS0   makelock(ttyS0) called
01/08 13:54:22 yS0   do_makelock: lock='/var/lock/LCK..ttyS0'
01/08 13:54:22 yS0   lock made
01/08 13:54:22 yS0  wfr: waiting for ``RING''
01/08 13:54:22 yS0   got: [0a][0d][0a]RING[0d]
01/08 13:54:22 yS0    CND: RING
01/08 13:54:22 yS0   wfr: rc=0, drn=0
01/08 13:54:22 yS0    CND: check no: 'none'
01/08 13:54:22 yS0  send: ATA[0d]
01/08 13:54:22 yS0  waiting for ``CONNECT''
01/08 13:54:22 yS0   got: ATA[0d]
01/08 13:54:22 yS0    CND: OKATA[0d][0a]+FCO[0d]
01/08 13:55:04 yS0    CND: +FCO
01/08 13:55:04 yS0  found action string: ``+FCO_''
01/08 13:55:04 yS0  start fax receiver...
01/08 13:55:04 yS0   fax receiver: entry
01/08 13:55:04 yS0   tss: set speed to 19200 (016)
01/08 13:55:04 yS0  fax_wait_for(OK)
01/08 13:55:04 yS0    got:[0a][0a]i[a8][dc]z_[f8]I[0c][cc][09][9e]?[09]
01/08 13:57:04 yS0  Warning: got alarm signal!
01/08 13:57:04 yS0  mdm_read_byte: read returned -1: Interrupted system
call
01/08 13:57:04 yS0  mdm_get_line: cannot read byte, return: Interrupted
system call
01/08 13:57:04 yS0  >> The problem seen above might be caused by a wrong
value of the
01/08 13:57:04 yS0  >> 'switchbd' option in 'mgetty.config' (currently
set to '19200')
01/08 13:57:04 yS0  >> try using 'switchbd 0'
01/08 13:57:04 yS0    looking for utmp entry... (my PID: 17023)
01/08 13:57:04 yS0   utmp + wtmp entry made
01/08 13:57:04 yS0   tio_set_flow_control( HARD XON_IN )
01/08 13:57:04 yS0  mdm_send: 'AT+FLO=2'
01/08 13:57:04 yS0    got:AT+FLO=2[0d]
01/08 13:57:04 yS0   mdm_command: string 'AT+FLO=2'
01/08 13:57:04 yS0    got:[0d][0a]OK[0d]
01/08 13:57:04 yS0   mdm_command: string 'OK' -> OK
01/08 13:57:04 yS0   98357 Mb free on /var/spool/fax/incoming
01/08 13:57:04 yS0  fax_get_pages: no pages to receive
01/08 13:57:04 yS0   fax receiver: hangup & end
01/08 13:57:04 yS0   fax_notify_mail: sending mail to: root
01/08 13:57:05 yS0   notify: '/etc/mgetty/new_fax -6 '' 0  >/dev/console
2>&1 </dev/null'
01/08 13:57:05 yS0   setenv: 'CALLER_ID=none'
01/08 13:57:05 yS0   setenv: 'CALLED_ID='
01/08 13:57:05 yS0   setenv: 'CONNECT='
01/08 13:57:05 yS0   setenv: 'DEVICE=ttyS0'
01/08 13:57:05 ##### fax dev=ttyS0, pid=17023, caller='none', name='',
id='', +FHNG=-06, pages=0/0, time=00:02:42



-----Original Message-----
From: Geoffrey [mailto:esoteric at 3times25.net] 
Sent: Thursday, January 08, 2004 1:50 PM
To: Atlanta Linux Enthusiasts
Subject: Re: [ale] HELP ! FAX receiving troubles


Mazukna, Tomas wrote:
> I do not have init-chat in /etc/mgetty/mgetty.config
> Should I? how should it look ?

Assuming you have a /etc/mgetty/mgetty.config file, you should look at 
setting the various options you'll find there.  Here is my init-chat 
from y USR faxmodem.  It's an earlier version than yours, but I suspect 
it may work:

init-chat "" \dATQ0V1H0 OK ATS0=0Q0&D3&C1 OK AT#CID=1 OK

Here is my answer-chat entry:

answer-chat "" ATA CONNECT \c \r



This is also where I use callerid to control who is permitted to send me

a fax.  :)  If you're interested in such options, check out cnd-program 
option.

-- 
Until later, Geoffrey	esoteric at 3times25.net

Building secure systems inspite of Microsoft

_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale