[ale] CD burner problems
Geoffrey
esoteric at 3times25.net
Mon May 12 15:38:18 EDT 2003
As someone else noted, try a different media.
ChangingLINKS.com wrote:
> links:~ # cdrecord -scanbus
> Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
> Linux sg driver version: 3.2.0
> Using libscg version 'schily-0.6'
> scsibus0:
> 0,0,0 0) 'IDE-CD ' 'R/RW 4x4x24 ' 'C12a' Removable CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
>
> On Monday 12 May 2003 01:45 pm, Geoffrey wrote:
>
>>What does 'cdrecord -scanbus' return?
>>
>>ChangingLINKS.com wrote:
>>
>>>I am having a problem gettng my CD burner to work under Suse. Below is
>>>the output of what is happened (looks like it is going to work and fails
>>>"OPC"). Anyone else run into this problem?
>>>
>>>Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
>>>TOC Type: 1 = CD-ROM
>>>Using libscg version 'schily-0.6'
>>>atapi: 1
>>>Device type : Removable CD-ROM
>>>Version : 0
>>>Response Format: 1
>>>Vendor_info : 'IDE-CD '
>>>Identifikation : 'R/RW 4x4x24 '
>>>Revision : 'C12a'
>>>Device seems to be: Generic mmc CD-RW.
>>>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>>>Driver flags : SWABAUDIO
>>>Supported modes: TAO PACKET RAW/R16
>>>Drive buf size : 1572864 = 1536 KB
>>>FIFO size : 4194304 = 4096 KB
>>>Track 01: data 19 MB
>>>Total size: 22 MB (02:14.21) = 10066 sectors
>>>Lout start: 22 MB (02:16/16) = 10066 sectors
>>>Current Secsize: 2048
>>>ATIP info from disk:
>>> Indicated writing power: 6
>>> Is not unrestricted
>>> Is not erasable
>>> Disk sub type: Medium Type C, low Beta category (C-) (6)
>>> ATIP start of lead in: -11231 (97:32/19)
>>> ATIP start of lead out: 359848 (79:59/73)
>>>Disk type: Short strategy type (Phthalocyanine or similar)
>>>Manuf. index: 27
>>>Manufacturer: Prodisc Technology Inc.
>>>Blocks total: 359848 Blocks current: 359848 Blocks remaining: 349782
>>>Starting to write CD/DVD at speed 4 in real TAO mode for single session.
>>>Last chance to quit, starting real write in 9 seconds. 8
>>>seconds. 7 seconds. 6 seconds. 5 seconds. 4
>>>seconds. 3 seconds. 2 seconds. 1 seconds. 0
>>>seconds. Operation starts.
>>>Waiting for reader process to fill input buffer ... input buffer ready.
>>>Performing OPC...
>>>
>>>cdrecord: Input/output error. send opc: scsi sendcmd: no error
>>>CDB: 54 01 00 00 00 00 00 00 00 00 00
>>>status: 0x2 (CHECK CONDITION)
>>>Sense Bytes: 70 00 03 00 00 00 00 13 00 00 00 00 00 73 00 00
>>>Sense Key: 0x3 Medium Error, Segment 0
>>>Sencse Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
>>>Sense flags: Blk 0 (not valid)
>>>cmd finished after 7.3s timeout 60s
>>>cdrecord: OPC failed.
>>>cdrecord: fifo had 64 puts and 0 gets.
>>>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
--
Until later: Geoffrey esoteric at 3times25.net
The latest, most widespread virus? Microsoft end user agreement.
Think about it...
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale
More information about the Ale
mailing list