[ale] cups continued

[Charles Shapiro]

Uh, I think setserial(8) is the program you are looking for. Usually it
gets called somewhere in the init scripts. It's worth eyeballing the
command line there and seeing if it works interactively.

I used to have trouble with serial ports on linux. You need to make
sure:

* the proper drivers are loaded (not a problem if you're already seeing
the device in /dev/ttyS0 and /dev/ttyS1)
* setserial gets run properly
* You have the right device on the right port.


-- CHS
On Tue, 2002-09-10 at 10:59, Geoffrey wrote:
> looking around on this box, it appears that maybe my port may not be set 
> up correctly.  Although I see the following in the messages log:
> 
> parport0: PC-style at 0x378 [SPP]
> 
> In /proc/parport/hardware I find:
> 
> base: 
> 0x378
> irq: 
> none
> dma: 
> none
> modes: 
> SPP
> 
> So, anyone know of a setparallel???? :(
> 
> -- 
> Until later: Geoffrey		esoteric at 3times25.net
> 
> I didn't have to buy my radio from a specific company to listen
> to FM, why doesn't that apply to the Internet (anymore...)?
> 
> 
> ---
> This message has been sent through the ALE general discussion list.
> See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
> sent to listmaster at ale dot org.
> 


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.