[ale] irq conflict?

[David S. Jackson]

Hi,

I'm having trouble running down some irq (I think) conflicts on an old
system.

I have an old p5-200 mb (not sure which brand, don't care to open it up
*again* just now).  I've got 

pci uhci usb controller
sb16 (old) soundcard
3c509b isa nic
Adaptec 2940uw pci scsi controller 


Linux says my interrupts (/proc/interrupts) are

  0	timer
  1	keyboard
  2	cascade
  7	soundblaster
  9	eth0 
  11	aic7xxx
  12	ps/2 mouse
  13	fpu
  14	ide0


But, the soundblaster will only work on irq 7 and I can't seem to make
the nic work on 9 or 10.  I've disabled pnp on the nic using the
3c5x9cfg utility.  I've tried about every other irq I can think of on
the card, and two or three work, but only at the expense of either the
soundcard and/or the usb controller.  right now, forexample, i get sound
but no nic or usb controller.  So, is there a way in the bios I can
rearrange things or free up irqs?

TIA

-- 
David S. Jackson                        dsj at dsj.net
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Romeo wasn't bilked in a day.
  -- Walt Kelly, "Ten Ever-Lovin' Blue-Eyed Years With Pogo"

---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.