[ale] hwclock hangs
Joe Steele
joe at madewell.com
Wed May 15 13:38:22 EDT 2002
The following may [not] help in diagnosing your problem:
The kernel source includes a test program in
linux/Documentation/rtc.txt which you could compile and run to check
the functionality of /dev/rtc. Also, check the contents of
/proc/interrupts (IRQ 8) before and after running the test program to
see if the rtc is generating interrupts.
You could also look at the contents of /proc/driver/rtc (to see if
the RTC is keeping time).
An strace of hwclock may also provide some clues.
--Joe
-----Original Message-----
From: Jonathan Gardner [SMTP:jgardn at alumni.washington.edu]
Sent: Tuesday, May 14, 2002 8:22 PM
To: ale at ale.org
Subject: [ale] hwclock hangs
I have scratched a hole in my head with this one.
I have an ASUS A7V133. I have been running SuSE 7.1 since it first came
out. Yesterday, I went and bought SuSE 8.0. I go to install it, and I
fiddled with the partitions to get it the way I liked it, but I made a
mistake and got /var and /usr confused and the installation was screwed.
No worry, I have a backup of my home directory, so nothing important was
lost.
I go to reinstall it, and during the probing, it hangs.
I look at another console to see what is happening - it turns on hwclock
is hanging. Sure enough, hwclock hangs whenever it is called.
I run hwclock -D and it says it hangs after it looks for a clock tick.
The clock tick never comes.
I can get aninstallation running, but every time it boots, init hangs on
the CMOS clock stage. Hitting CTRL-C will get it to continue. And it
doesn't continue quite the way I would like it to.
I've tried installing older kernels, but the problem persists. Which
makes me think it is something to do with my motherboard. Do you think
the SuSE 8.0 probing is setting something off and turning off the clock
or something? How can I tell? How can I prevent it from happening?
Someone suggested I replace the battery. Replacing the battery helped
for a few times, but then it started hanging again. Of course, it was an
old battery, but it wasn't that old. I'm going to go get a newer battery
unless I can think of something else.
Any suggestions?
Jonathan
---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.
---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.
More information about the Ale
mailing list