[ale] I give up

James P. Kinney III jkinney at localnetsolutions.com
Fri Jun 28 08:30:06 EDT 2002


I have had oodles of headaches lately with burning CD's. It seems that
the sg (generic scsi) driver gets "confused" after a CD had been
mounted. As I was a bozo and compiled it into my kernel, I have had to
reboot to clear up the sg driver. If yours is a module, /sbin/depmod -r
sg and then /sbin/depmod sg should reset the thing.



On Fri, 2002-06-28 at 08:11, cfowler wrote:
> I give up on recording CD's in Linux.  Can someone please tell me what
> the hell I'm doing wrong?
> 
> 
> 
> [root at cfowler tmp]# cdrecord -v -speed=10 -dev=0,0,0 -data ./Win98.iso
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.22
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'CDWRITER'
> Identifikation : 'IDE1610         '
> Revision       : '0.19'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1971200 = 1925 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  626 MB
> Total size:     719 MB (71:14.21) = 320566 sectors
> Lout start:     719 MB (71:16/16) = 320566 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type A, high Beta category (A+) (3)
>   ATIP start of lead in:  -11079 (97:34/21)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 39283
> Starting to write CD/DVD at speed 12 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01:   0 of 626 MB written.cdrecord: Input/output error. write_g1:
> scsi sendcmd: no error
> CDB:  2A 00 00 00 00 1F 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 71 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
> Sense Key: 0x5 Illegal Request, deferred error, Segment 0
> Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No
> matching qualifier] Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.001s timeout 40s
> 
> write track data: error after 63488 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing  time:   10.761s
> Fixating...
> cdrecord: Input/output error. close track/session: scsi sendcmd: no
> error
> CDB:  5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
> session) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 480s
> cmd finished after 0.000s timeout 480s
> Fixating time:    0.002s
> cdrecord: fifo had 65 puts and 2 gets.
> cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.
> 
> 
> This is a brand new unit that has proved itself working under Winbloze.
> 
> 
> ---
> This message has been sent through the ALE general discussion list.
> See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
> sent to listmaster at ale dot org.
-- 
James P. Kinney III   \Changing the mobile computing world/
President and CEO      \          one Linux user         /
Local Net Solutions,LLC \           at a time.          /
770-493-8244             \.___________________________./

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics)
<jkinney at localnetsolutions.com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7 




---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.






More information about the Ale mailing list