[ale] Lite-On 1640

[Dow Hurst]

dev=0,0,0 seems too much like the scsi controller.  Isn't more like 
dev=0,1,0 or some such beast?  Is the ide-scsi emulation setup right?
Dow

cfowler wrote:

>Is there a secret to getting the LITE-ON 1640 CD-RW to work under
>RH7.3?  Here is what I get:
>
>
>
>[root at cfowler tmp]# cdrecord -v -speed=2 -dev=0,0,0 -data ./l.iso
>Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Linux sg driver version: 3.1.22
>Using libscg version 'schily-0.5'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 1
>Vendor_info    : 'LITE-ON '
>Identifikation : 'LTR-16102B      '
>Revision       : 'OS06'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags   : SWABAUDIO
>Drive buf size : 1966272 = 1920 KB
>FIFO size      : 4194304 = 4096 KB
>Track 01: data    0 MB         padsize: 280 KB
>Total size:       0 MB (00:04.02) = 302 sectors
>Lout start:       1 MB (00:06/02) = 302 sectors
>Current Secsize: 2048
>ATIP info from disk:
>  Indicated writing power: 4
>  Is not unrestricted
>  Is not erasable
>  Disk sub type: Medium Type A, high Beta category (A+) (3)
>  ATIP start of lead in:  -11849 (97:24/01)
>  ATIP start of lead out: 359848 (79:59/73)
>Disk type:    Long strategy type (Cyanine, AZO or similar)
>Manuf. index: 25
>Manufacturer: Taiyo Yuden Company Limited
>Blocks total: 359848 Blocks current: 359848 Blocks remaining: 359546
>Starting to write CD/DVD at speed 2 in write mode for single session.
>Last chance to quit, starting real write in 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Performing OPC...
>Starting new track at sector: 0
>Track 01:   0 of   0 MB written.
>Track 01: writing 280 KB of pad data.
>Track 01: Total bytes read/written: 327680/614400 (300 sectors).
>Writing  time:   27.970s
>Fixating...
>
>cdrecord: Input/output error. close track/session: scsi sendcmd: no
>error
>CDB:  5B 00 02 00 00 00 00 00 00 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 72 00 00 00
>Sense Key: 0x3 Medium Error, Segment 0
>Sense Code: 0x72 Qual 0x00 (session fixation error) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 113.069s timeout 480s
>cmd finished after 113.069s timeout 480s
>Fixating time:  113.095s
>cdrecord: fifo had 6 puts and 6 gets.
>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>[root at cfowler tmp]#
>
>
>Do I need to run Windows to burn on this thing?
>
>
>
>
>---
>This message has been sent through the ALE general discussion list.
>See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
>sent to listmaster at ale dot org.
>
>
>  
>


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.