[ale] append options

[Chris Fowler]

linux would be the name of the image.  Is your image named Linux?


What is strange it that I can do the following:


v0.4 init=/bin/bash
v0.4 2


And it works


but 
flash init=/bin/bash
flash 2


Still gives me /sbin/init and run level 5


Chris



-----Original Message-----
From: ChrisColeman at mail.clayton.edu [mailto:ChrisColeman at mail.clayton.edu]
To: ale at ale.org
Sent: Thursday, January 18, 2001 1:35 PM
To: ChrisF at computone.com
Subject: RE: [ale] append options



I believe the command should be append='linux 2'. At least I know I use the command 'Linux 1' to change runlevels at the lilo prompt on bootup.

Chris
-----Original Message-----
From: Chris Fowler [mailto:ChrisF at computone.com]
To: ale at ale.org
Sent: Thursday, January 18, 2001 1:27 PM
To: 'ale at ale.org'
Subject: [ale] append options



Hello, 
I want init to use runleve 2 when lilo boots "flash" I've tried append='2' and I've tried 'init 2'.  I've even tried "init=/bin/bash"  No matter what,

My device keeps going into tun level 5.  Is there something I did wrong? 
Thanks, 
Chris 
# 
# Lilo configuration for DOC2000 
# 
boot=/dev/fla 
map=/boot/map 
install=/boot/doc.b 
disk=/dev/fla 
bios=0x80 
read-only 



image = /boot/kernel 
        root=/dev/ram7 
        initrd=/boot/initrd.gz 
        label=v0.4 
        vga=0x301 
        append="console=/dev/tty2" 
image = /boot/kernel 
        root=/dev/ram7 
        initrd=/boot/initrd.gz 
        label=flash 
        vga=4 
        append="2 console=/dev/tty1"