[ale] ide reset

James Kinney jkinney at localnetsolutions.com
Fri Aug 3 20:58:38 EDT 2001


15G Maxtors hard drives are no longer being made due to a heat problem.
You might be able to get some better life from it by adding cooling. But
plan on a new hard drive soon.

 On Fri, 3 Aug 2001, C I wrote:

> My hard drive is kicking up error messages when being
> left on for extended periods of time (i.e. 12 hours +)
> the error message is basically to the effect:
>
> hde: irq timeout: status=0x80 { Busy }
> ide2: reset : unable to process command.
>
> The machine at this point is locked up, and upon
> rebooting the BIOS will not reconize the ATA/100 bus.
> If I leave the machine off for a few moments then it
> comes back up I sometimes have to repair the file
> system but usually it is ok.  The machine is new and
> the Hard Drive is a 15gig Maxtor.
> I searched the archives and found I short thread on
> the subject.  One suggestion was to replace the Hard
> Drive, but I would rather not have to deal with that.
> The last entry was to recompile the kernel (theirs
> happened to be 2.4.1) and added DMA and PCI support.
> They said that this fixed the process.  I am going to
> try this as soon as my machine comes back on line.
>
> I was wondering if any one else has had this trouble
> and what they have tracked it down to.
>
> CI
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
> --
> To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.
>

-- 
James P. Kinney III   \Changing the mobile computing world/
President and COO      \          one Linux user         /
Local Net Solutions,LLC \           at a time.          /
770-493-8244             \.___________________________./

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.





More information about the Ale mailing list