[ale] 3C509BTP EtherLink III Good or Bad?

[Bao Ha]

Not neccessarily!  The driver can turn the heartbeat on, and may have
delay it.

The driver module can configure the card in non-PNP mode.  Not sure
about PNP.

If you can make bootable DOS diskette, grab the diskette set from
3com.

Bao

-----Original Message-----
From: owner-ale at ale.org [mailto:owner-ale at ale.org]On Behalf Of Dow Hurst
To: ale at ale.org
Sent: Thursday, September 07, 2000 12:35 AM
To: ale at ale.org
Subject: [ale] 3C509BTP EtherLink III Good or Bad?


If I apply power to the machine and the hub the card is plugged into
doesn't show the link lighting up, does this mean the card is bad?
These are old used ISA cards that I am falling back to from the new PCI
based cards I had tried previously.  Also, since the cards don't have
jumpers for IRQ settings, can I have the module set them when loading?
Thanks,
Dow


--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message
body.

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.