[ale] eth1?

[Robert L. Harris]

This is a debian box.  There is no /etc/sysconfig.  I tried to
make the right interfaces file and bring it up, but it doesn't
even see the eth1 device.

Robert

Thus spake Scott Nolde (smnoldelinux at mediaone.net):

> "Robert L. Harris" wrote:
> > 
> > I put a second netgear card in my box. The first card comes up fine.
> > One is a FA301 and the other a FA310 I believe, but they're identicle
> > by looking at them.  The driver is compiled in.  Do I need to do
> > anything to bring up the second interface?
> > 
> > Robert
> > 
> > :wq!
> > ---------------------------------------------------------------------------
> > Robert L. Harris                |  Micros~1 :
> > Senior System Engineer          |    For when quality, reliability
> >   at RnD Consulting             |      and security just aren't
> >                                 \_       that important!
> > DISCLAIMER:
> >       These are MY OPINIONS ALONE.  I speak for no-one else.
> > FYI:
> >  perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
> > 
> 
> Make an /etc/sysconfig/network-scripts/ifcfg-eth1 (for redhat).  This
> should be very similar to eth0's configuration, except in another
> subnet.  If eth0 is assigned by dhcp, then make eth1 a static ip
> address.
> 
> Do you want forwarding?
> echo 1 > /proc/sys/net/ipv4/ip_forward
> 
> To start the interface, ifup eth1, or restart networking for all
> interfaces.
> 
> - Scott
> 
> -- 
> Never do Windows again with  |  Scott M. Nolde
> Linux!  No streaks, haze or  |  smnoldelinux at mediaone.net
> glaze!                       |  
> 7:35pm up 3 days, 19:59, 0 users, load average: 1.00, 1.00, 1.00



:wq!
---------------------------------------------------------------------------
Robert L. Harris                |  Micros~1 :  
Senior System Engineer          |    For when quality, reliability 
  at RnD Consulting             |      and security just aren't
                                \_       that important!
DISCLAIMER:
      These are MY OPINIONS ALONE.  I speak for no-one else.
FYI:
 perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.