[ale] more on the IP/MASQ question, need help
jj at spiderentertainment.com
jj at spiderentertainment.com
Thu Sep 23 16:24:43 EDT 1999
Ok, here's the nfo, and what I did do.
I have 2 windows machines and 1 linux, RH6.0 just installed.
Linux (two network cards, both are working)
eth0 is connected to cable modem (DHCP) via rj45
eth1 is connected to the windows machines via coaxal cable.
Linux machine can see the internet.
Windows machines can see the linux box, both nics (eth0, eth1), but they
can not see the internet.
I'm not at home right now, but this is what I did(from my memory).
eth0: ip address assigned by the DHCP server
eth1: 10.0.0.1 Netmas 255.255.255.0 on all for 10.0.0.
Windows 1: 10.0.0.2 gateway 10.0.0.1
Windows 2: 10.0.0.3 gateway 10.0.0.1
enabled the /proc.../ip_forward
loaded the ip_masq_autofw
test1: (same as in the HOWTO)
ipchains -P forward DENY
ipchains -F forward -j MAS -s 10.0.0.0/255.255.255.0 -d 0.0.0.0/0
I also used the ipchains input for DHCP as described in the HOWTO
since that did now work, I thought maybe it gets confused on which nic to MASQ.
so I did this:
ipchains -F forward -j MAS -s 10.0.0.0/255.255.255.0 -d 0.0.0.0/0 -P all -i
eth1
Then I switched to ipfwadm, I knew this will not work, but I tried it
anyways...
help ?
Joe Knapka wrote:
> You have, of course, invoked the magical incantation known
> as "Rusty's 3-line Guide to IP Masquerading" from the
> IP-Masq HOWTO, correct? Including the all-important
> "echo 1 > .../ip_forward"? And you have set all the Windows
> machines to use the Linux box as their gateway?
>
> -- Joe
>
> jj at spiderentertainment.com wrote:
> >
> > Ok, I give up, please help.
> > This is what I got so far:
> >
> > 2 machines are windows, 1 is linux RH6.0(just installed)
> >
> > Linux:
> > it has 2 network cards, both are working perfectly.
> > Eth0 is connected to a cable modem via RJ45.
> > Eth1 is connected to the other two windows machines via coaxal cable.
> >
> > Windows machines: work perfectly, they talk to linux(ping, telnet, etc)
> >
> > >From windows I can ping eth0 and eth1 but I can not seem to go outside, I
> > can not ping anything on the net.
> >
> > Can ya help ?
> >
> > Thank you.
>
> -- Joe Knapka
> * I speak only for myself, not for these idiots:
> * The Software Monastery - "Better Software Through Divine
> * Intervention." Source-code prayer vigils available - nominal
> * donation $0.01/LOC. http://whyme.penguinpowered.com/monastery.html
More information about the Ale
mailing list