[ale] X-CD-Roast help

ryan at techie.com ryan at techie.com
Mon Jul 5 10:29:14 EDT 1999


Here is what you have to do:
	1:  deselect atapi cdrom support in the kernel
	2:  Select scsi generic support
	3:  Select scsi cdrom support
	4:  Deselect "probe all LUNs"
	5:  Recompile the kernel

This will emulate your cdroms as /dev/scd0, /dev/scd1, etc,.  use these
devices in xcdroast and it will work like a charm.

On Mon, 5 Jul 1999, Jonathan wrote:

> I am trying to use an IDE CD-ROM and CD-RW to burn cd's using
> X-CD-Roast.  Here is the message that I get when I start:
> 
> "No generic-scsi-support has been detected.  Without it no scsi-device
> can be detected or used by x-cd-roast.  Please load the sb-module (eg
> "insmod sg") or recompile your kernel with generic support."
> 
> I have support built into the kernel.  When I go into scsi-info in
> x-cd-roast it shows both drives(/dev/hdc, /dev/hdd) as well as the hard
> drive (/dev/hda).  When I go to setup it shows both drives as an option
> in the reader, but I can't get any choice for the writter.
> 
> I run SuSE6.1, kernel 2.2.9.  Any help/ideas would be greatly
> appreciated.  TIA
> 






More information about the Ale mailing list