[ale] ViRGE/VX card not Xing in 5.2

[jeff_hubbs at mcgraw-hill.com]

Under RH 5.1, my computer's ViRGE/VX video card is recognized at install
time and runs X using "S3V" w/ no prob.
Monitor selection is "Generic Multisync"

During an RH 5.2 install (not upgrade), card is recognized but after the X
probing (i.e., after the normal "blinks"), screen goes dark and stays dark.

If I install RH5.1 and UPGRADE to RH 5.2, X works.

How can I get it to work under a RH 5.2 install?

- Jeff