[ale] [Fwd: Getting UMAX scanner to work with Future Domain]

[Zot O'Connor]

This is a multi-part message in MIME format.
--------------F67C66542D61970F3E76EA19
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Thought I try here and see what response I get.

-- 
Zot O'Connor

www.ZotConsulting.com
www.WhiteKnightHackers.com
--------------F67C66542D61970F3E76EA19
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Received: from ha1.rdc1.sfba.home.com (ha1.rdc1.sfba.home.com [24.0.0.66])
	by new.zotnet.com (8.8.5/8.8.5) with ESMTP id KAA14991;
	Mon, 14 Sep 1998 10:11:37 -0700
Received: from panda.mostang.com ([24.1.65.179]) by ha1.rdc1.sfba.home.com
          (Netscape Mail Server v2.02) with ESMTP id AAN15947;
          Mon, 14 Sep 1998 07:56:44 -0700
Received: (from majordom at localhost)
	by panda.mostang.com (8.8.7/8.8.7) id HAA00460
	for sane-devel-outgoing; Mon, 14 Sep 1998 07:56:43 -0700
Message-ID: <35F70A91.9DB7928B at ZotConsulting.com>
Date: Wed, 09 Sep 1998 16:09:05 -0700
 From: "Zot O'Connor" <zot at zotconsulting.com>
Organization: Zot Consulting
X-Mailer: Mozilla 4.05 [en] (WinNT; I)
MIME-Version: 1.0
To: sane-devel at mostang.com
Subject: Re: Getting UMAX scanner to work with Future Domain
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-sane-devel at mostang.com
Precedence: bulk
Reply-To: sane-devel at mostang.com

A while ago I complained that I could not get a future domain
to work with my Umax Vista S8 scanner.

Well I foobared the system and did a vanilla RedHat 5.1 Install.

>From my previous note:

> 
> I am having problems getting my future domain controller
> (old ISA) to recognize my Vista S8 scanner.
> 
> The controller worked extremely well recently, but I
> replaced it when I upgraded. I have an UDS-1101 (or whatever)
> working as a full SCSI under NT. I though I'd move it to Linux.
> 
> I have a jaz drive on the card too, it works.

I now have my NCR no parity (from an early mac I think) 1X Cdrom
attached an it works fine.

When I boot, I see the Umax at Scsi 3., and the CDROM at 5.

But when fdomain loads I see the CDROM only.

This is not dual boot.

ls -l /dev/sg*

crw-------   1 root     sys       21,   0 May  5 13:32 /dev/sga
crw-------   1 root     sys       21,   1 May  5 13:32 /dev/sgb
crw-------   1 root     sys       21,   2 May  5 13:32 /dev/sgc
crw-------   1 root     sys       21,   3 May  5 13:32 /dev/sgd
crw-------   1 root     sys       21,   4 May  5 13:32 /dev/sge
crw-------   1 root     sys       21,   5 May  5 13:32 /dev/sgf
crw-------   1 root     sys       21,   6 May  5 13:32 /dev/sgg
crw-------   1 root     sys       21,   7 May  5 13:32 /dev/sgh

cat /proc/scsi
cat /proc/scsi
cat: /proc/scsi: Invalid argument

cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: NEC      Model: CD-ROM DRIVE:25  Rev: 1.0a
  Type:   CD-ROM                           ANSI SCSI revision: 01

ls -l /proc/scsi/fdomain/
total 0
-rw-r--r--   1 root     root            0 Sep  9 15:52 0

cat /proc/scsi/fdomain/0
Future Domain TMC-16x0 SCSI driver, version 5.44

Sep  9 16:02:46 eater kernel: scsi1 : Future Domain TMC-16x0 SCSI driver, versio
n 5.44
Sep  9 16:02:46 eater kernel: scsi : 1 host.
Sep  9 16:02:46 eater kernel:   Vendor: NEC       Model: CD-ROM DRIVE:25   Rev: 1.0a
Sep  9 16:02:46 eater kernel:   Type:   CD-ROM                             ANSI SCSI revision: 01
Sep  9 16:02:46 eater kernel: Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0

Module         Pages    Used by
fdomain            3            0
sg                 1            0
eexpress           3            1 (autoclean)



I do not have a spare scsi driver at the moment, but I have
had this scanner work under NT with an onboard apatec, and
the UDS freebie (to which I attached my Jaz as well!).


BTW I do hear the scanner do its "must make noise to tell
scsi card that I am here" when I load the driver.


-- 
Zot O'Connor

www.ZotConsulting.com
www.WhiteKnightHackers.com


--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo at mostang.com

--------------F67C66542D61970F3E76EA19--