<p dir="ltr">Yep. Auto mount of usb stuff is (usually) automagic in gnome. </p>
<div class="gmail_quote">On Oct 18, 2015 9:11 PM, "DJ-Pfulio" <<a href="mailto:DJPfulio@jdpfu.com">DJPfulio@jdpfu.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">If you want to see which partitions are available: sudo parted -l<br>
If you want to see partitions AND LVs: lsblk<br>
<br>
To me, dmesg is useful to see the last few lines when a new device has<br>
been connected - hopefully that will list the USB storage. If not, try a<br>
different USB port and/or don't use a USB hub. Some storage devices do<br>
not work with USB hubs at all. My servers DO NOT automatically mount<br>
storage.<br>
<br>
Is auto-mounting of USB media actually the default?<br>
<br>
As others have asked - does manually mounting the storage work?<br>
<br>
<br>
On 10/18/2015 08:45 PM, Sean Kilpatrick wrote:<br>
> checking dmesg leaves me even more confused!<br>
><br>
> ---------------[dmesg output]---------------------------<br>
><br>
> [235921] usb 3-11: new high-speed USB device number 29 using xhci_hcd<br>
> [235992] usb 3-11: Device not responding to set address.<br>
> [448907] usb 3-11: New USB device found, idVendor=14cd, idProduct=125c<br>
> [448911] usb 3-11: New USB device strings: Mfr=1, Product=3,<br>
> SerialNumber=2<br>
> [448912] usb 3-11: Product: Mass Storage Device<br>
> [448914] usb 3-11: Manufacturer: Generic<br>
> [448924] usb 3-11: SerialNumber: 125C20100726<br>
> [451930] usb-storage 3-11:1.0: USB Mass Storage device detected<br>
> [453745] scsi20 : usb-storage 3-11:1.0<br>
> [455243] scsi 20:0:0:0: Direct-Access Mass Storage Device<br>
> PQ: 0 ANSI: 0 CCS<br>
> [455593] sd 20:0:0:0: Attached scsi generic sg8 type 0<br>
> [459766] sd 20:0:0:0: [sdh] 15523840 512-byte logical blocks: (7.94<br>
> GB/7.40 GiB)<br>
> [460211] sd 20:0:0:0: [sdh] Write Protect is off<br>
> [460213] sd 20:0:0:0: [sdh] Mode Sense: 03 00 00 00<br>
> [460894] sd 20:0:0:0: [sdh] No Caching mode page found<br>
> [460896] sd 20:0:0:0: [sdh] Assuming drive cache: write through<br>
> [464419] sd 20:0:0:0: [sdh] No Caching mode page found<br>
> [464422] sd 20:0:0:0: [sdh] Assuming drive cache: write through<br>
> [466138] sdh: sdh1<br>
> [471053] sd 20:0:0:0: [sdh] No Caching mode page found<br>
> [471056] sd 20:0:0:0: [sdh] Assuming drive cache: write through<br>
> [471058] sd 20:0:0:0: [sdh] Attached SCSI removable disk<br>
> [735687] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts<br>
> [069731] usb 3-11: USB disconnect, device number 29<br>
><br>
> ---------------------------------------------------------------------<br>
><br>
> And here are the last few lines of the output from "mount" after the sd<br>
> card is attached to the box:<br>
> /dev/sdb1 on /home type xfs (rw,relatime,seclabel,attr2,inode64,noquota)<br>
> /dev/sda1 on /boot type xfs (rw,relatime,seclabel,attr2,inode64,noquota)<br>
> fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)<br>
> gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse<br>
> (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)<br>
><br>
><br>
> -------------------------------------------------------------------------------<br>
><br>
> as you can see, there is no indication the card was mounted.<br>
><br>
> Could this be an SELinux problem?<br>
><br>
> Sean<br>
><br>
> -------------------------------------------------------------------------------<br>
><br>
><br>
> On Sun, 2015-10-18 at 18:53 -0400, Jim Kinney wrote:<br>
>> Sounds like it's time for ddrescue or photorec (excellent) then a flame<br>
>> thrower or hammer.<br>
>><br>
>> Check dmesg to see what the system says it it and try to manually mount it.<br>
>><br>
>> Also, some external readers are crappy. Unplug the usb, insert the card,<br>
>> plug in the usb.<br>
>> On Oct 18, 2015 6:45 PM, "Sean Kilpatrick" <<a href="mailto:kilpatms@gmail.com">kilpatms@gmail.com</a>> wrote:<br>
>><br>
>>> I have an 8 gig sd card that may be FUBAR.<br>
>>><br>
>>> When I plug it into the computer (USB connection) nothing happens. The<br>
>>> system does not automount the chip as it should.<br>
>>><br>
>>> But, If I go to the GUI and check for USB devices it appears on the list<br>
>>> of available devices. When I click on the line (7.4 GiB Rem...) I get<br>
>>> this:<br>
>>><br>
>>> UDI: /org/freedesktop/UDisks2/block_devices/sdh<br>
>>><br>
>>> The "mount" command does NOT list the device.<br>
>>><br>
>>> Obviously, at some level the OS (CentOs7) knows the card has been<br>
>>> attached to the system. But it won't automount it as it should.<br>
>>><br>
>>> Clues would be appreciated as I really would like to recover the pix on<br>
>>> this SD card.<br>
>>><br>
>>> Sean<br>
>>><br>
_______________________________________________<br>
Ale mailing list<br>
<a href="mailto:Ale@ale.org">Ale@ale.org</a><br>
<a href="http://mail.ale.org/mailman/listinfo/ale" rel="noreferrer" target="_blank">http://mail.ale.org/mailman/listinfo/ale</a><br>
See JOBS, ANNOUNCE and SCHOOLS lists at<br>
<a href="http://mail.ale.org/mailman/listinfo" rel="noreferrer" target="_blank">http://mail.ale.org/mailman/listinfo</a><br>
</blockquote></div>