<div dir="ltr">This procedure may help. I copied the text below in case you don't want to pick the link.<br><div><div><br><a href="http://my.okidata.com/idocs2.nsf/alldocsweb/8CD9C7D220D90486852568CF00709A97?OpenDocument">http://my.okidata.com/idocs2.nsf/alldocsweb/8CD9C7D220D90486852568CF00709A97?OpenDocument</a><br>
<br>------------------------------------------------------------------------------------------------------------------------------------------------<br> <br>Setting Top of Form on the ML-320/1<br> <br>
Doc #:<br> 2863 <br>Category:<br> Product Usage <br>Last Updated:<br> <br>01/19/2001<br> <br> How To:<br>Setting TOF and Tear <br> <br> Action:<br>1. Set Forms tear-off to 500MS in printer menu.<br>
<br>2. Press park<br><br>3. Pull bail arm lever forward and the paper will load into the printer.<br><br>4. Then push bail lever back, the paper will jump to tear position. If needed to adjust tear position, deselect printer<br>
and adjust with platen knob.<br><br>5. With the printer deselected, Press and hold TOF and that will bring paper to TOF, if need to adjust keep holding<br>TOF and use the form feed button to move up or line feed to move down<br>
<br>* The 320 has 1" top margin due to bail arm. <br> <br> <br>Product(s):<br> ML320; ML321<br> <br> <br> Oki Data has taken care to insure that the information is complete, accurate and up-to-date. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of Oki Data.<br>
CopyrightŠ 2004, Oki Data, Americas, Inc.<br> <br> <br><br>------------------------------------------------------------------------------------------------------------------------------------------------<br></div>
</div><div class="gmail_extra"><br clear="all"><div><div dir="ltr">...John<div><br></div></div></div>
<br><br><div class="gmail_quote">On Fri, Aug 30, 2013 at 1:30 PM, Beddingfield, Allen <span dir="ltr"><<a href="mailto:allen@ua.edu" target="_blank">allen@ua.edu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<font style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">It is too high. They are positioning the print head about 1/3 the way down, but it rolls the paper back to where the print head is higher on the page. On the old one that is of
the same exact model, it did not reposition the paper - it would just start printing where ever they had rolled it to.<br>
Allen B.</font><br></div></blockquote></div></div></div>