Chris,

Looks like a cabling problem. Make sure you are

using a straight-through (not null-modem) serial

cable that has the modem control lines wired

(RTS,CTS,DTR,DSR). If that doesn't work, try adding

a null-modem adapter. (You -are- using the right

serial port.)

-- Joe

Jay Finch wrote:



> I thought COM1 was ttyS0 ...??  (And COM2 was ttyS1)  Is this correct?  If

> so, then it's looking on the wrong COM port. :~)



> Cheers!

> Jay



> At 03:28 PM 1/11/2000 -0500, Chris Egolf wrote:

> >Has anyone had any luck using APC's PowerChute Plus for Linux?

> >

> >I've got an APC Back-UPS 500 and I've downloaded the 4.5.2 version of

> >PowerChute Plus.  The serial cable is connected to COM2 (/dev/ttyS1),

> >but when I run the Config.sh utility I get the following messages:

> >

> > >

> > ----------------------------------------------------------------------------

> > > WARNING: Port must be configured for modem control in order to work with a

> > > "Simple" Signaling UPS

> > >

> > ----------------------------------------------------------------------------

> > >

> > ----------------------------------------------------------------------------

> > > WARNING: Could not communicate with device on /dev/ttyS1.

> > > Check that the communications cable is attached properly to both the device

> > > and the serial port.

> > >

> > ----------------------------------------------------------------------------

> > >

> > > WARNING: Serial communications never verified, the installed product may

> > > not work properly.  You may want to try the following:

> > >

> > >       1) Check that specified serial device exists.

> > >       2) Check the device configuration is appropriate for your UPS type

> > >       3) Rebuild or create the serial device using the utility appropriate

> > >          for your system.

> >

> >The documentation and their website isn't much help, unless I'm missing

> >something.

> >

> >What does 'Port must be configured for modem control' mean?

> >   Do I have to use the setserial  command to configure ttyS1 somehow?

> >

> >BTW, the serial cable works fine on the same UPS under NT4.0.

> >

> >Thanks

> >--

> >============================================================================

> >                                Chris Egolf

> >              http://www.ugholf.net     ">cegolf@ugholf.net

> >============================================================================

> >--

> >To unsubscribe: mail ">majordomo@ale.org with "unsubscribe ale" in message body.



> -----

> Jay Finch                       : "That's what the smell is, Mount

> (770) 650-0410  (voice)         :  Saint Helens.  Pompeii was

> ">horus@larp.com                  :  yellin' ... It's gonna blow!

> ">pagejay@larp.com (pager)        :  Whoah, whoah, whoah.. Volcano!"

> MTBI Survey says:  ENFJ         :    -- The Presidents of the USA

>    Check out my home page at:  http://www.photobooks.com/~horus/



> --

> To unsubscribe: mail ">majordomo@ale.org with "unsubscribe ale" in message body.

-- Joe Knapka

* What happens when a mysterious force meets an inscrutable object?


--
To unsubscribe: mail ">majordomo@ale.org with "unsubscribe ale" in message body.